The Principle Of The Carpet Tufting Machine

A Carpet Tufting Machine works like sewing, after which the yarn forms a tick base fabric through the pile loops, hook and pile mechanism, the tick pile mechanism usually includes a hook knife, and is used to move the seat An electric seat driving device, but the existing pile hook cutter 1". There are upper and lower transverse sides, the front end of the upper transverse side can be bent downward to form a hook portion, and the rear end of the upper transverse side is formed. The front end of the lower horizontal edge is connected to the front end of the lower horizontal edge, and the rear end of the lower horizontal edge becomes the insertion tail. Therefore, when the pile is hooked, the upper horizontal edge is inserted into the pile loop, and the pile is hooked through the hook part. The loop cannot be slipped from the upper horizontal edge after being hooked, and the looping knife 1' also moves back and forth for the duration of the company. Reach out to hook the next loop, so once the loops that have been hooked cannot develop and come out of the upper horizontal edge in time, then they will accumulate on the velvet knife 1', which will cause the velvet knife 1' to be unable to continue. In the existing information technology, the common practice is to set a straight knife 2' again, and drive the straight knife 2' to move up and down through data to form a kind of shearing with the velvet knife 1', so that the loop is cut. cut, so that the loops can be released from the hooking knife 1' in time, which is convenient for the hooking knife 1' to calculate the next hooking operation, but this makes the existing tufting machines in our country only produce the loops Cut pile products that are cut open, but loop pile products that do not cut loops cannot be produced.

https://www.wxmatale.com/