The Production Knowledge Of Artificial Grass Tufting Machine

Hooks are formed in the process where there are upper and lower lateral edges, and the front end of the upper lateral edge can be bent downward. The rear end of the upper lateral edge is connected with the front end of the lower lateral edge, and the rear end of the lower lateral edge It becomes the insertion tail. Therefore, when the pile is hooked, the upper horizontal edge is inserted into the pile loop, and the pile is hooked through the hook, but because the pile loop cannot be completely slipped from the upper horizontal edge after being hooked, The crocheting knife 1'also moves back and forth for the duration of the company, that is, after the crocheting knife 1'hooks a loop of the robot, everyone must extend again to hook and remove the next loop. Therefore, once the loop is hooked, it cannot If the development escapes from the upper horizontal edge in time, they will accumulate on the crochet knife 1', which will affect the crochet knife 1'to no longer continue to crochet. In the existing information technology, the usual practice is to set it again. A straight knife 2'drives the straight knife 2'to move up and down through data, forming a kind of shearing with the hooking knife 1'to cut the pile loops so that the pile loops can be released from the hooking knife 1'in time , It is convenient for the tangling knife 1'to calculate the next tangling operation, but this also causes the existing tufting machines in our country to produce cut pile products that cut the pile loops by themselves, but cannot produce the cut pile products that do not cut the pile loops. Loop cashmere products.

www.wxmatale.com